| DDR testing platform |
| Clock Frequency |
200 Mhz & 266 Mhz selectable |
| Address Depth |
4 Gigawords test capacity up to 16 row x 16 column |
| Data Width |
Expandable up to 80 bits |
| Timing Range |
-1 , 0 and 1 ns |
| Timing Resolution |
1 ns |
| Vdd Range |
0.1V to 2.7V with 0.1V step and 10%Bounce |
| Vih, Voref Range |
0.1V to 2.7V with 0.1V step |
| Read Latency |
2,3 clocks |
| Refresh Cycle |
Auto/Self Refresh - 8祍/Row |
| Refresh Modes |
Auto Refresh , Self Refresh |
| Leakage Test Option |
+/- 1礎(chǔ) to +/- 5mA |
| Test Features |
Burst Mode, Programmable Data Mask, Data Strobe, and Clock Suspend Modes |
| Current Test |
Icc Standby, Icc Operating-Avg Icc up to 1.5A, Peak Curent up to 2.0A |
| Burst Length |
Programmable to 2,4,8 |
| CAS Latency |
Programmable read Latency From Column Address |
| Serial PD |
256 Bytes programmable |
| Testing Support Options |
DDR 184pin DIMM and 200pin SODIMM |
| SDRAM testing platform |
| Clock Frequency |
133 mhz 100 mhz, 66mhz, 33mhz selectable |
| Address Depth |
4 Gigawords test capacity up to 16 row x 16 column |
| Data Width |
Expandable up to 160 bits |
| Timing Range |
0ns to 20ns in 1ns resolution |
| Timing Resolution |
in steps of 1ns resolution |
| Vcc Range |
0.1V to 3.6V with 0.1V step and 10 %Bounce |
| Vih, Voref Range |
0.1V to 3.6V with 0.1V step |
| Read Latency |
1,2,3 clocks |
| Refresh Cycle |
Auto/Self Refresh - 8祍/Row to 64祍/Row |
| Refresh Modes |
RAS only, CAS before RAS, Self Refresh |
| Leakage Test Option |
+/- 1礎(chǔ) to +/- 5mA |
| Test Features |
Burst Mode, Programmable Data Mask and Clock Suspend Modes |
| Current Test |
Icc Standby, Icc Operating-Avg Icc up to 1.5A, Peak Curent up to 2.0A |
| Burst Length |
Programmable to 1,2,4,8 or Full Page |
| CAS Latency |
Programmable read Latency From Column Address |
| Serial PD |
256 Bytes programmable |
| Testing Support Options |
SDRAM 100p, 168p, 200p, 244p, 278p DIMM, 144p Sodimm, TSOP, SGRAM 144p and many more |
| General specifications |
| Power Requirements |
90-130 VAC, 180-260 VAC at 50Hz or 60 Hz |
| Operating Temperature |
-20 to 100 degree Fahrenheit |
| Humidity |
20% to 80%, non condensing |
| Overcurrent Protection |
2A; to prevent Vcc and Ground short problems |
| Host Computer Requirement (Not Included) |
IBM PC or Compatible 386/486/Pentium with one ISA or EISA bus interface slot available for CST, Inc. proprietary interface card |
| Operating System Requirement (Not Included) |
Standard Microsoft Window Windows 95/98 |
公司簡(jiǎn)介
